On-Line PD monitoring switchgear and its Efficiency

Are you interested in the diagnosis of any insulation fault before it happens and cause expensive irreparable damages? Then employing the use of an On-Line PD testing switchgear is the way to go. By this, you will be able to determine how safe existing switchgear is, provide lots of desirable and valuable information before you can consider making a replacement or even a retrofitting.

Below are some of the great benefits you anticipate to get when you employ the use of an on-Line PD monitoring and testing switchgear;

Ø  There is always a reduced network downtime

Ø  Switchboard safety is highly increased

Ø  Increasing the knowledge of the condition of your assets is inevitable. In fact this is the greatest pro of all of them.

The partial discharge measurement, testing and the monitoring process is carried out by the use of Transient Earth Voltage (TEV) sensors, Acoustic detectors as well as the High Frequency Current Transformers (HFCT).  There is no requirement for shutdown when the above sensors are being used since they happen to be all non-invasive.

The PD Cable Mapping

The capturing of waveforms from the sensors is done by the Testing Unit that performs a sampling rate of as high as 500 MS/s. The software used in this device ensures that the discharges are classified through examination of the waveform shape together with the frequencies. Since the waveforms are studied from multiple efficient TEV sensors, LIVE HV test engineers are able to read the PD levels as well as accurately locate the area where the PD emanates from.

As the switchgear continues to age, there is a greater likelihood that dangerous PD will increase. Most of the ageing switchgear has no capability of withstanding any internal fault.  As a result, the operators can end up grappling with more serious issues  of running aged switchgear which most often leads to failure.

PD testing switchgear will be able to detect any fault such as installation of cables in an unsuitable cable box. When you consider making a switchgear replacement, you are as well advised to run a PD testing since this can easily and quickly give you a direction to the switchboards that are imposing great risks to one’s network. PD testing is a network testing system that can also be used in the determination of the feasibility of a retrofitting of a new circuit breaker into an already existing switchboard.

Switchgears are tested for a partial discharge during the time of manufacture. However, the Australian Switchgear Maintenance Standard AS2467 does recommend that a routine checkup should be done on the switchgear insulation throughout the lifetime of the switchgear. The PD testing equipment that has been lately designed provides accurate assessments of insulation as well as locating all the PD sites. All these happen while the switchgear still remains live.

Online partial discharge testing and monitoring has helped many businesses to maintain the reliability and longevity of their electrical assets. It is the best investment to optimize on your infrastructure without making significant investments in retrofitting the installations.

Seamless Migration to VOIP in Melbourne

The modern office environment consistently deploys demands for Australian businesses. Now, it is imperative to create conditions where workers can freely communicate and collaborate on projects at any time and at any place – even without a physical face-to-face meeting. With unified communications and other modern means of communicating offered by business phones Melbourne service providers, you can achieve this when it comes to work communication.

UC systems are capable of knitting together different features for your business. Apart from the almost ubiquitous VOIP communications, it is possible to integrate other features to facilitate seamless communication within your organization. These include instant messaging functionality, mobility, collaboration functionality, and presence.

These also create a seamless environment, where employees can communicate with each other in relative ease. What’s more, business phones Melbourne offer several advantages for organizations making the migration – allowing them to achieve improvements in productivity, as well as reductions in communication costs.

On the other hand, deploying UC systems is not always a seamless affair. You should have a prudent plan in place to ensure that your projects are successful, as well as make a seamless migration for your business.

Here are a few things to remember when making the big shift from traditional telephone systems into modern business telephone systems:

  • Perform a network assessment.

Take a thorough assessment to determine if you need any network upgrades for your business. Your network is running fine, but it might not support a new VOIP system. If your network is outmoded, you are more likely to experience dropped calls or poor quality of voice when installing the VOIP. This is often the case with networks with latency or jitters.

Check if your network switches can support a Power-over-Ethernet (PoE) cable, which powers new IP phones. In case you are using old network switches, you need to carry out network upgrades before contracting a new business phones Melbourne system.

  • What is the state of your wireless LAN?

In the post-PC age, your employees are likely to be more interested in using their sleek smartphones to work and communicate. But can your wireless LAN support this? If you are still deploying an old network, you might need to upgrade your wireless LAN network.

  • Conduct a pilot test.

Before deploying new business phones in Melbourne systems organization-wide, it might be advisable to run a pilot test and scale up based on the test’s success. This will give you the time and the experience to uncover any potential hitches before fully-implementing business phones Melbourne systems.

  • Plan the migration process.

Make a comprehensive plan on rollling out new business phones Melbourne systems away from legacy systems. You cannot migrate overnight or over a weekend. This is a long-going process that requires meticulous planning – including budgeting, staff training, and other considerations. In fact, a phased rollout of business phones systems into your communication infrastructure is always a preferred option over the flash-cut approach.

For more information on having a seamless migration to VOIP in Melbourne, you can visit Prosum’s official website at http://www.prosum.com.au/articles/business-telephone-systems-sydney-melbourne-brissy.aspx

LED Strip Light Applications in Today’s Home

A good portion of the world is currently embracing green technologies and that means LED lighting devices are increasingly becoming a popular lighting option for many people. Both at the personal level and the commercial level, the LED lighting fixtures are finding a wide range of applications. They can also be comfortably used in both the indoors as well as the outdoors lighting fixtures. The LED light strip are particularly advantageous in this respect because they come with a host of advantages.

The most obvious feature of the LED strip lights is that they are very light in weight and come in a great range of very dazzling colors that buyers can choose from. Additionally, these lighting fixtures are easily customizable and users can easily cut them into exact lengths which they prefer before installing them in their residential areas. You can easily get the most suited sizes for these strip lights for your preferred target applications.

Due to the improvements in the efficiency of these lighting technologies along with the relatively low prices for the LED strip lighting, they currently find wide applications in numerous places. For example, they are used as the background lighting in the advertising banners, applied in kitchen lighting fixtures, applied in garden installations, and in the commercial lighting on a wide range of commercial installations.

You can apply these stylish and sleek lighting fixtures in order to add discrete enhancements to a wide range of areas in your home or commercial enterprises. When choosing the LED lighting, you have to make the choice between the SMD 3528 and the SMD 5050 LED lighting. The former is more energy efficient while the latter emits a brighter light in your home. With the 5050, you can have more flexibility in your color modes and even make adjustments to achieve varied lighting spectra. Here are tips on some areas where you can apply your LED light strip:

The LED Light Strips Used in Bedrooms

You can use these strip lighting fixtures in order to create an awesome and magical effect in your bedroom. Your bedroom is your last sanctuary. It is therefore important to spare no effort in order to give it the most desirable look. With the strip lighting installations, you can give it the perfect makeover and make it the best place where you can retire and enjoy a beautiful and quiet time.

Use in Gardens

If you would like to create a magical outdoor effect in your gardens, then you can apply the strip lighting installations to add some subtle lighting to your gardens particularly during the summers. They can be used to create a really magnificent effect that adds some beauty to the living.

Use in the Bathroom

The bathroom is another good place where you can apply the LED strip lighting fixtures. Some of the places in your bathrooms where you can install them include around the bathroom mirrors, the bathroom sinks, showers and even closets. They will not only enhance the look and lighting of your bathroom but also make it look and feel cool, chic and ultra-sterile.

Use in Kitchens

Want to add some classy edge to your kitchen counters? Try out the LED strip lighting. You can add lights in the kitchen counters, closets or even the edges.

Because of the versatility of these lighting fixtures, the range of areas where you can apply them is only limited by your imagination. Wherever you want to create some beauty with your lighting installations, you can add your LED lighting fixtures.